13549213581 肖生

 

医疗级ISO 10993, USP 第VI类,医疗/护理用品,电子束消毒, 辐射消毒,眼镜, 薄膜

 

Eastar™ 6763

共聚多酯

Eastman Chemical Company

Technical Data

 

产品说明

Meets ISO 10993 and/or USP Class VI biocompatibility requirement; Food Contact Status compliant.

Eastar™ Copolyester 6763 is a clear, amorphous material that can be molded and extruded with ease. Its excellent performance properties include clarity, toughness, good melt strength, no dusting, no stress whitening, good heat sealability, easy cutting and thermoforming. Eastar™ Copolyester 6763 may be colored using color concentrates, dry colors, or liquid colorants. Eastar™ Copolyester 6763 can be safely sterilized with proper ethylene oxide, radiation, or electron beam methods without property loss or color shift. It is well suited for a variety of applications including, medical packaging, cosmetics and personal care packaging, food and beverage packaging, and display & signs.

 

In medical applications Eastar™ coplyester 6763 provides:

• Superior, long-term clarity provides easy identification of instruments 

• Excellent puncture resistance and impact toughness ensure package integrity 

• Excellent ability to be subjected to several methods of sterilization, providing flexibility and security to the device manufacturer 

• Excellent optical and physical property stability post sterilization 

• Good melt strength offers wide processing latitude and ease in thermoforming 

 

The production and trimming of rigid medical trays made from sheet of Eastar™ copolyester 6763 results in little or no dust or particulates. After the thermoformed trays are made, they are put in polybags. The polybags of trays are then placed in protective boxes for storage or shipment. As long as the polybags in the protective boxes are intact and no outside contamination is evident, the thermoformer or medical device manufacturer should not need to clean the tray prior to packaging a device and sealing the package. If contamination is found on the medical trays and cleaning is required, use a lint-free towel. Blowing the tray out with filtered, deionized, non-lubricated air is also acceptable, assuming this does not stir up dust from the surrounding area. Using alcohol, which could cause crazing, or water, which would not evaporate, is not recommended.

 

This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED

The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

 

This product has been CRADLE TO CRADLE CERTIFIED Silver.

The CRADLE TO CRADLE CERTIFIED Mark is a registered certification mark used under license through McDonough Braungart Design Chemistry (MBDC). MBDC is a global sustainability consulting and product certification firm. The CRADLE TO CRADLE framework moves beyond the traditional goal of reducing the negative impacts of commerce (‘eco-efficiency'), to a new paradigm of increasing its positive impacts (‘eco-effectiveness'). At its core, Cradle to Cradle design perceives the safe and productive processes of nature's ‘biological metabolism' as a model for developing a ‘technical metabolism' flow of industrial materials. Product components can be designed for continuous recovery and reutilization as biological and technical nutrients within these metabolisms. For more information about MBDC and to obtain printable certificates for Eastman Copolyesters, visit www.mbdc.com. Choose Eastman Chemical Company under Company Name in C2C Certified products to display a list of our products.

 

总体

 

材料状态 • 已商用：当前有效

资料 1 •  Technical Datasheet (English)

UL 黄卡 2 •  E118289-101981969

搜索 UL 黄卡 •  Eastman Chemical Company

•  Eastar™

供货地区 • 北美洲 • 拉丁美洲 • 亚太地区

• 非洲和中东 • 欧洲

• 电子束消毒 • 良好的熔体强度 • 食品接触的合规性

特性 • 辐射消毒 • 良好的着色性

• 好的消毒性 • 清晰度，高 • 无定形的

• 抗穿孔性 • 韧性良好

• 包装 • 家具 • 体育用品

• 包装，化妆品 • 片材

• 玩具

• 薄壁包装 • 容器

用途 • 文具

• 薄膜 • 实验室器具

• 医疗/护理用品

• 层压板 • 食品包装

• 医用包装

• 电气/电子应用领域 • 收缩性薄膜

机构评级 • ISO 10993 • USP 第VI类

 

Eastar™ 6763

共聚多酯

Eastman Chemical Company

总体

外观 • 清晰/透明

形式 • 粒子

加工方法 • 薄膜挤出 • 片材挤出成型

物理性能 额定值(英制) 额定值(公制) 测试方法

比重

-- 1.27 1.27g/cm³ ASTM D792

73°F (23°C) 1.27g/cm³ 1.27g/cm³ ISO 1183/D

-- 1.27g/cm³ 1.27g/cm³ ASTM D1505

吸水率 (73°F (23°C), 24 hr) 0.13% 0.13% ASTM D570

ISO 62

机械性能 额定值(英制) 额定值(公制) 测试方法

拉伸模量 (73°F (23°C)) 305000psi 2100MPa ASTM D638

ISO 527-2

抗张强度 ASTM D638

屈服, 73°F (23°C) 7250psi 50.0MPa ISO 527-2

断裂, 73°F (23°C) 4060psi 28.0MPa

伸长率

断裂, 73°F (23°C) 130% 130% ASTM D638

断裂, 73°F (23°C) 100% 100% ISO 527-2

弯曲模量

73°F (23°C) 305000psi 2100MPa ASTM D790

73°F (23°C) 290000psi 2000MPa ISO 178

弯曲应力

73°F (23°C) 9860psi 68.0MPa ISO 178

屈服, 73°F (23°C) 10200psi 70.0MPa ASTM D790

撕裂阻力 ASTM D2582

MD : 73°F (23°C), 9.8 mil (250.0 µm) 93N 93N

TD : 73°F (23°C), 9.8 mil (250.0 µm) 93N 93N

薄膜 额定值(英制) 额定值(公制) 测试方法

薄膜厚度 - 经测试 9.8mil 250µm

割线模量 ASTM D882

MD : 9.8 mil (250 µm) 276000psi 1900MPa

TD : 9.8 mil (250 µm) 276000psi 1900MPa

抗张强度 ASTM D882

MD : 屈服, 9.8 mil (250 µm) 7540psi 52.0MPa

TD : 屈服, 9.8 mil (250 µm) 7540psi 52.0MPa

MD : 断裂, 9.8 mil (250 µm) 8560psi 59.0MPa

TD : 断裂, 9.8 mil (250 µm) 7980psi 55.0MPa

伸长率 ASTM D882

MD : 屈服, 9.8 mil (250 µm) 4.0% 4.0%

TD : 屈服, 9.8 mil (250 µm) 4.0% 4.0%

MD : 断裂, 9.8 mil (250 µm) 400% 400%

TD : 断裂, 9.8 mil (250 µm) 400% 400%

落锤冲击 4 ASTM D1709A

0°F (-18°C), 9.8 mil (250 µm) 500g 500g

73°F (23°C), 9.8 mil (250 µm) 400g 400g

埃尔曼多夫抗撕强度 ASTM D1922

MD : 9.8 mil (250 µm) 1400g 1400g

TD : 9.8 mil (250 µm) 1700g 1700g

裤型撕裂耐性 5 ISO 6383-1

MD 206lbf/in 36.0N/mm

TD 206lbf/in 36.0N/mm

 

Eastar™ 6763

共聚多酯

Eastman Chemical Company

薄膜 额定值(英制) 额定值(公制) 测试方法

透氧率 (73°F (23°C), 9.8 mil (250 µm), 50% RH) cm³•mil/100in²/at cm³•mm/m²/atm/ ASTM D3985

25m/24 hr 1024 hr

水气透过率 ASTM F1249

100°F (38°C), 100% RH, 9.8 mil (250 µm) 0.45g/100 in²/24 hr 7.0g/m²/24 hr

Carbon Dioxide Permeability ASTM D1434

73°F (23°C), 9.8 mil (250.0 µm) cm³•mil/100in²/at cm³•mm/m²/atm/

120m/24 hr 4924 hr

抗撕裂蔓延性 6 ASTM D1938

MD : 73°F (23°C), 9.8 mil (250.0 µm) 210lbf/in 36kN/m

TD : 73°F (23°C), 9.8 mil (250.0 µm) 210lbf/in 36kN/m

冲击性能 额定值(英制) 额定值(公制) 测试方法

悬壁梁缺口冲击强度

-40°F (-40°C) 0.69ft•lb/in 37J/m ASTM D256

73°F (23°C) 1.9ft•lb/in 100J/m ASTM D256

-40°F (-40°C) 2.0ft•lb/in² 4.2kJ/m² ISO 180/1A

73°F (23°C) 3.0ft•lb/in² 6.2kJ/m² ISO 180/1A

无缺口悬臂梁冲击

-40°F (-40°C), 0.126 in (3.20 mm) 无断裂 无断裂 ASTM D4218

-22°F (-30°C), 0.126 in (3.20 mm) 无断裂 无断裂 ASTM D4218

-4°F (-20°C), 0.126 in (3.20 mm) 无断裂 无断裂 ASTM D4218

73°F (23°C), 0.126 in (3.20 mm) 无断裂 无断裂 ASTM D4218

-40°F (-40°C) 7 无断裂 无断裂 ISO 180/1U

-22°F (-30°C) 7 无断裂 无断裂 ISO 180/1U

-4°F (-20°C) 7 无断裂 无断裂 ISO 180/1U

73°F (23°C) 7 无断裂 无断裂 ISO 180/1U

装有测量仪表的落镖冲击

-40°F (-40°C), 0.0984 in (2.50 mm), Energy at 363in•lb 41.0J ASTM D3763

Peak Load

-40°F (-40°C), 0.126 in (3.20 mm), Energy at 443in•lb 50.0J ASTM D3763

Peak Load

73°F (23°C), 0.0984 in (2.50 mm), Energy at 248in•lb 28.0J ASTM D3763

Peak Load

73°F (23°C), 0.126 in (3.20 mm), Energy at 292in•lb 33.0J ASTM D3763

Peak Load

-40°F (-40°C), 0.0984 in (2.50 mm), 25.8ft•lb 35.0J ISO 6603-2

能量到力量峰值 8, 9

-40°F (-40°C), 0.126 in (3.20 mm), 26.6ft•lb 36.0J ISO 6603-2

能量到力量峰值 8, 9

73°F (23°C), 0.0984 in (2.50 mm), 29.5ft•lb 40.0J ISO 6603-2

能量到力量峰值 8, 9

73°F (23°C), 0.126 in (3.20 mm), 32.5ft•lb 44.0J ISO 6603-2

能量到力量峰值 8, 9

硬度 额定值(英制) 额定值(公制) 测试方法

洛氏硬度

R 级, 73°F (23°C) 106 106 ASTM D785

R 计秤, 73°F (23°C) 109 109 ISO 2039-2

热性能 额定值(英制) 额定值(公制) 测试方法

载荷下热变形温度 ASTM D648

66 psi (0.45 MPa), 未退火 158°F 70.0°C

264 psi (1.8 MPa), 未退火 147°F 64.0°C

玻璃转化温度 176°F 80.0°C DSC

维卡软化温度 185°F 85.0°C ASTM D1525

线形热膨胀系数 - 流动 2.8E-5in/in/°F 5.1E-5cm/cm/°C ASTM D696

(-22 到 104°F (-30 到 40°C))

 

Eastar™ 6763

共聚多酯

Eastman Chemical Company

热性能 额定值(英制) 额定值(公制) 测试方法

比热 DSC

140°F (60°C) 0.311Btu/lb/°F 1300J/kg/°C

212°F (100°C) 0.421Btu/lb/°F 1760J/kg/°C

302°F (150°C) 0.449Btu/lb/°F 1880J/kg/°C

392°F (200°C) 0.471Btu/lb/°F 1970J/kg/°C

482°F (250°C) 0.490Btu/lb/°F 2050J/kg/°C

导热系数 (73°F (23°C)) 1.5Btu•in/hr/ft²/°F 0.21W/m/K ASTM C177

电气性能 额定值(英制) 额定值(公制) 测试方法

介电强度 10 (73°F (23°C)) 410V/mil 16kV/mm ASTM D149

介电常数 ASTM D150

73°F (23°C), 1 kHz 2.60 2.60

73°F (23°C), 1 MHz 2.40 2.40

耗散因数 ASTM D150

73°F (23°C), 1 kHz 5.0E-3 5.0E-3

73°F (23°C), 1 MHz 0.020 0.020

耐电弧性 158sec 158sec ASTM D495

光学性能 额定值(英制) 额定值(公制) 测试方法

光泽度 (45°, 9.84 mil (250 µm)) 108 108 ASTM D2457

透射率 ASTM D1003

常规, 9.84 mil (250 µm) 89.0% 89.0%

总计, 9.84 mil (250 µm) 91.0% 91.0%

透明度 (9.84 mil (250 µm)) 85.0 85.0 ASTM D1746

雾度 (9.84 mil (250 µm)) 0.80% 0.80% ASTM D1003

 

 

 

 

 

 

 

医疗级ISO 10993共聚多酯,医疗级ISO 10993塑胶原料PETG Eastar™ 6763是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123 

13549213581 肖生